Standard: Singapore Standard SS245: 1995 Cross reference to British Standard BS 7491 Part 3:1994 and BS EN 13280:2001
Materials: Resin- Isophthalic unsaturated polyester resin conforming to BS 3532 specification Fiber Glass- Low alkali fibre glass conforming to JIS R3411 to R3417 or BS 3396, BS 3496 and BS 3749 specifications
Testing Method:BS 2782
Manufacturing Process: SMC Hot Pressed Compression Moulding
Tank Structural Support:
External Supports:
Hot Dipped Galvanized Steel I-Beams forming a Box Section of HDG I Beams , C Channels , Angles to form a METAL FREE TANK (No metallic Components within the tank)
KEY FEATURE : Hot Dipped Galvanized I- Beams Standing along the each vertical line of GRP Panel Flange, Interconnected by C Channels laterally and fastened to the Skid Base by I-Beam Support and Connected to the opposite faces on the roof by HDG Flat bars or Tie-Rods
Roof Support:
Sealant: Nontoxic PVC foam Sealant – SCAPA 3507 c/w Data Sheet
Bolt, Nuts, Washers:
External:
Standard : Hot Dipped Galvanized Steel
Optional : SS 304/A2 or SS 316/A4
Internal : (Roof)
Standard : SS 304/A2 (In-contact with water)
Optional : SS 316/A4 (In-contact with water)
Ladders:
External
Standard: Hot Dipped Galvanized Steel
Optional: GRP or Stainless Steel
Internal
Standard : PVC
Optional : GRP or Stainless Steel
Water Level Indicator:
Standard : Reversed Reading Mechanical Ball Float Type with Mouse
Optional : Direct Reading Clear Tube Type
Nozzle / Flange Connections: Flat panels will be provided for any type of piping connections
Additional Mechanisms: