GRP Standard Sectional Water Tanks

Standard:

Singapore Standard SS245: 1995 Cross reference to British Standard BS 7491 Part 3:1994 and BS EN 13280:2001

Materials: Resin- Isophthalic unsaturated polyester resin conforming to BS 3532 specification

Fiber Glass- Low alkali fibre glass conforming to JIS R3411 to R3417 or BS 3396, BS 3496 and BS 3749 specifications

Testing Method: BS 2782

Manufacturing Process: SMC Hot Pressed Compression Moulding

Tank Structural Support:

External Supports: Hot Dipped Galvanized Steel Accessories and Fixtures

Internal Supports:

• Standard Type: SS 304 Tie-Rods or Cleat / Angle Stay
• Optional Type: SS 316 Tie-Rods or Cleat / Angle Stay

KEY FEATURE:

STAINLESS STEEL TIE RODS connecting the opposite faces of the tank to act as internal reinforcement and support the tank walls to withstand the Water pressure in the tank.

Roof Support:

• PVC Vertical Poles
• GRP roof panel stiffener

Sealant: Nontoxic PVC foam Sealant - SCAPA 3507 c/w Data Sheet

Bolt, Nuts, Washers:

External:

Standard: Hot Dipped Galvanized Steel

Optional : SS 304/A2 or SS 316/A4

Internal:

Standard: SS 304/A2 (In-contact with water)

Optional: SS 316/A4 (In-contact with water)

Ladders:

External

Standard: Hot Dipped Galvanized Steel

Optional: GRP or Stainless Steel

Internal

Standard : PVC

Optional : GRP or Stainless Steel

Water Level Indicator:

Standard : Reversed Reading Mechanical Ball Float Type with Mouse

Optional : Direct Reading Clear Tube Type

Nozzle / Flange Connections:

Flat panels will be provided for any type of piping connections

Additional Mechanisms:

• PARTITION In the Tanks
• Anti-Vortex Plates
• Float Valve Chambers
• Seismic Restrain Design
• Safety Hoops / Cages
• Bottom Sump
• Inverted Base Tanks